Statek公司自豪地宣布發布其30kRad耐受、超高沖擊、低相位噪聲振蕩器。CXOXLPNR能夠承受高達100000g的沖擊，封裝在3.2x2.5mm貼片晶振的密封陶瓷封裝中，工作溫度范圍為-55°C至+125°C。CXOXLPNR提供低電壓CMOS輸出，具有低相位噪聲、低抖動和低加速度靈敏度。在125MHz時，其本底噪聲在20MHz偏移處為-165 dBc/Hz，在12kHz至20MHz范圍內的典型RMS相位抖動為75fs。CXOXLPNR石英晶振具有滿足所有項目要求的篩選選項，將成為所有近地軌道（LEO）應用的首選。

Statek的超小型低地球軌道（LEO）適用振蕩器具有高沖擊和30kRad生存能力。這些石英晶體振蕩器提供具有超低相位噪聲、抖動和加速度靈敏度的低電壓CMOS輸出。在50MHz下，從12kHz到20MHz的典型RMS相位抖動僅為150fs。

CXOXLPNR產品特征：

●30kRad（Si）總電離劑量

●高抗震性，三點安裝*100000 g可選

●3.2x2.5毫米微型包裝，提供其他包裝選項

●帶啟用/禁用功能的CMOS輸出石英晶振

●低相位噪聲和抖動

●可進行全面軍事測試

●加速度靈敏度低

●寬電源電壓選項（1.8V至3.3V）

●無PLL偽影

●密封陶瓷包裝

●在美國設計和制造

應用程序：太空與航空航天，小型衛星，命令和數據處理（C&DH），通訊，航行，全球定位系統

Statek斯塔克晶振公司位于加利福尼亞州奧蘭治市，是美國領先的高可靠性晶體和振蕩器的設計師和制造商。Statek的核心能力是能夠使用其專利光刻和化學研磨工藝在石英晶片中設計和制造超小型諧振器。Statek成立于1970年，已成為所有需要高可靠性和極其穩健性能的行業的高沖擊和高振動晶體和振蕩器的首要供應商。Statek具有卓越的沖擊和振動、擴展的溫度范圍、體積小和極高的可靠性，是工業、軍事、醫療和航天行業的首選供應商。

Statek的CXOXLPNR具有高沖擊和30kRad生存能力
Statek Corporation is proud to announce the release of its 30 kRad tolerant, ultra-high shock, low phase-noise oscillator. Capable of withstanding shocks up to 100,000 g, the CXOXLPNR is housed in a hermetically sealed ceramic 3.2 x 2.5 mm package and has an operating temperature range of -55 °C to +125 °C. The CXOXLPNR delivers a low voltage CMOS output with low phase noise, low jitter and low acceleration sensitivity. At 125 MHz, its noise floor is -165 dBc/Hz at 20 MHz offset and the typical RMS phase jitter over 12 kHz to 20 MHz is 75 fs. Available with screening options to meet all program requirements, the CXOXLPNR will become the preferred choice for all Low Earth Orbit (LEO) applications.
Located in Orange, California, Statek Corporation is the leading U.S. designer and manufacturer of high reliability crystals and oscillators. Statek’s core competency is its ability to design and manufacture ultra-miniature resonators in quartz wafers using its patented photolithographic and chemical milling processes. Founded in 1970, Statek has become the premier supplier of high shock and high vibration crystals and oscillators for all industries requiring high reliability and extremely robust performance. With superior shock and vibration, extended temperature ranges, small size and extreme high reliability, Statek is the supplier of choice for the Industrial, Military, Medical, and Space industries.

OSCILLATOR MODEL	PACKAGE (mm)	FREQUENCY RANGE (Click for Data Sheet)
CXOU Ultra-Low Power	2.0 x 1.2	32 kHz to 100 kHz
CXOL Ultra-Low Power	3.2 x 1.5	32 kHz to 100 kHz
CXOLAT	3.2 x 1.5	32.768 kHz
CXOLHG High Shock	3.2 x 1.5	16kHz to 32.768 kHz
CXOLHT Performance to 200°C Shock to 100,000g	3.2 x 1.5	16 kHz to 50 MHz
CXOLP Low Power	3.2 x 1.5	1 MHz to 8.5 MHz
CXOQ, CXOQHG High Shock	2.5 x 2.0	16 kHz to 100 MHz
STXO, STXOHG Tight Frequency Stability Shock to 100,000g	3.2 x 2.5	10 MHz to 70 MHz
CXOX, CXOXHG High Shock	3.2 x 2.5	16 kHz to 160 MHz
CXOXHT High Temperature	3.2 x 2.5	32.768 kHz 1 MHz to 50 MHz
CXOXULP Ultra-Low Power	3.2 x 2.5	32.768 kHz
CXOXULPHT High Temperature Ultra Low Power	3.2 x 2.5	32.768 kHz
CXOXLPN Low Phase Noise High Shock	3.2 x 2.5	10 MHz to 125 MHz
CXOXLPNR Radiation Tolerant	3.2 x 2.5	20 MHz to 125 MHz
MTXO, MTXOHG Tight Frequency Stability (±5ppm) High Shock	3.2 x 2.5	10 MHz to 50 MHz
CXOMK, CXOMKHG High Shock	6.5 x 5.0	32.768 kHz 200 kHz to 200 MHz
CXOMKHT High Temperature	6.5 x 5.0	32.768 kHz 200 kHz to 50 MHz
LVDS	3.2 x 5.0 7.0 x 5.0	10 MHz to 160 MHz
ETXO High Frequency	7.5 x 5.0	20 MHz to 125 MHz
HTXO High Temperature	7.5 x 5.0	32.768 kHz 1.5 MHz to 50 MHz
HGXO High Shock	7.5 x 5.0	32.768 kHz to 50 MHz
HGXOHT High Shock High Temperature	7.5 x 5.0	32.768 kHz 460 kHz to 50 MHz